What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 21.06.2025 23:50
Now when you have a certain ac resistance, then a current flows in a loop.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Do you think your landlord should have a key to your room?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
but I think this circuit , shows a few more pieces.
The MOV will conduct when the voltage exceeds 50% of line voltage.
It also is a device that limits the change in current flow.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This is 'the assistant's answer'
Why did we evolve to have so many nerve endings in our anuses?
so, what happens?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Apple Unveils AI-Powered 'Workout Buddy' for Apple Watch at WWDC - MacRumors
So, the voltage could go up to 500 volts, and the fuse will not open up.
For this case there are devices called Metal oxide varistors (MOV).
This one hit behind the barn.
Bulls' Billy Donovan and Every Knicks Request Denied amid HC Search Rumors - Bleacher Report
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
In schematic diagrams this is the symbol for a fuse:
What is lightning?
Unfortunately For Some, These iPhone & iPad Models Won't Be Getting iOS 26 - SlashGear
I post the exact comment here.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
a photo is worth a thousand words.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Barnstars:
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
At least they know the answer if they wanted it.
These are simplified answers to the original question, and does not change anything I wrote above.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
First-ever airborne toxin detected in Western Hemisphere - Phys.org
These devices are installed between the “hot” and “neutral” and protective ground.
An AC voltage/ current source, and an ac inductive load.
But it can get overloaded, and no longer works.
Dementia Risk Declining With Each Generation, Says Promising New Study - ScienceAlert
One
[old diagram got deleted by accident]
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
There are two important concepts here.
There are three different concepts here that are getting confused.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
One is “what exactly is in a ‘surge protector’ ? ”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
2024–10–10[John johnson John Johnson ]
This device then solves the entire problem.
but this device (an Inductor) … impedes the rapid changes in the current.
The third is lightning and “how it gets conducted into a home.”
Because the load is inductive, the current lags the voltage.(by a bit).
The bolt then partially travels down the line to your home.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This is where the MOV conducts again, and dissipated the energy.
He then describes the function of a fuse.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
He then asserts :
what exactly is a ‘surge’ protector?
First Sentence:
What does a fuse do?
2024–10–16 [ OO OLAOYE OYEBODE ]
[image of Common-mode choke]
Here is a simplified AC power diagram.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
A circuit breaker is similar, but is resettable.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
nine
Edit 2024–10.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
He then describes Rainy Season and Lightning.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
the problem then depends on "how fast does the fuse operate?".
But… the neutral is now “floating” because of the 1 ohm resistance.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
At one ohm, the resistor has a maximum of 1 watt power.
The other is “what does a “fuse” do?”
eight
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Upvotes:
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
(Dc diagram shown, AC is similar).
A fuse is a non-resetable over current circuit protector.
It seems Mohan does not understand the difference between a comment and an Answer.